Click here for the monthly special!

Advance Power Inc. Insulating Ceramic Coatings
Reduce Your Home and Business Energy Consumption


You're Hot? We're Not!

Cool Roof Rating Council tested API Ceramic coatings and certified that our coatings passed all tests. API Ceramic coatings are California title 24 compliant and exceeded California title 24 test requirements. API ceramic coatings are also Leed certified. API Ceramic coatings are also Energy Star certified and exceed Energy Star requirements.

Ceramic Paint Quality Control Example
Ceramic Paint Certification Requirements

Last fall we painted our entire new building with ceramic paint. The roof coat was much thicker than the wall coat. This ceramic paint is incredible. Thousands of microscopic ceramic particles in every square inch. Ceramics have the highest insulation values known. Before we painted our huge roll up doors (big enough to drive a semi through), they would radiate heat 20 feet away. They were like a blast furnace in the summer. Now you can stand right next to them and barely feel the heat. The hotter it gets the higher the insulation value. The roof coat is the roof and can be applied directly over the roof sheathing without another layer needed. This paint creates an elastic membrane that expands and contracts with the structure. This is especially important for cement or stucco buildings that tend to crack as they age. Plus the paint is environmently friendly, water based and simple to clean up. Turn down your air conditioner and go ceramic products from Advance Power Company.

API Ceramic Roof Coating:

Ceramic Roof Coatings are highly efficient, energy-saving, flexible coatings, made from a water-based pure acrylic resin system filled with vacuumed sodium borosilicate ceramic micro spheres of less than 100 microns in size. Each micro sphere acts as a sealed cell and the entire mastic acts as a thermally efficient blanket covering the entire structure. These coatings are non-toxic, friendly to the environment, and form a monolithic (seamless) membrane that bridges hairline cracks. They are completely washable and resist many harsh chemicals. API Roof Coats have high reflectance and high emissivity as well as a very low conductivity value. API Roof Coats greatly reduce thermal shock and heat penetration by keeping roof surfaces much cooler in hot summer weather. They offer UV protection and low VOC's. They display excellent dirt pick-up resistance and retain their flexibility after aging. API Ceramic Roof Coats reduce noise transmission and have an effective use range from -40 Deg C (-40 Deg F) to 375 Deg C (700 Deg F).





API Ceramic Exterior Coating:

Ceramic Exterior Wall Coats are highly efficient, energy-saving, flexible coatings, designed to insulate and waterproof exterior walls. They are non-toxic, friendly to the environment, and form a monolithic (seamless) membrane that bridges hairline cracks. They are completely washable and resist many harsh chemicals and dirt pick-up. These water-based coatings are made from an acrylic resin system filled with vacuumed ceramic micro spheres that acts as a thermally efficient blanket. API Exterior Wall Coats can be applied by roller or sprayer. Exterior Wall Coats put a stop to the "frequent painting cycle" - they outlast other paints several times over. They have superb waterproofing performance, fire resistance and their adhesion increases with saturation. These coatings have "Variable Permeability" - they become watertight when saturated by water, and breathe away trapped water vapor when dry. They protect against UV, greatly reduce thermal shock and sound transmission, and have low VOC levels. These coatings come in a variety of architectural colors and leave a beautiful matt finish.







API Ceramic Stucco Coating:

The API Ceramic Texture Coat is a water base protective coating that can be applied in place of paint, and as an alternative to the conventional and often costly three and more part stucco texture systems. This unique wall coating can be applied quickly, is much less labor intensive and provides an effective and durable thermal barrier. The base and finish coats incorporate hollow borosilicate ceramic micro spheres. These micro spheres reflect, refract and dissipate heat away from the coated surface. The formula also incorporates a 100% acrylic polymer resin that allows the transmission of water vapor to escape, thus reducing moisture build-up in the wall assembly. This flexible stucco coating bridges hairline cracks and prevents the development of new ones.









API Ceramic Coatings Price List:

Description: Size: Price:
API Ceramic Roof Coatings 5 Gallons $235.00
API Ceramic Wall Coatings 5 Gallons $250.00


Comments ()

Post a comment (Optional)


Questions? E-mail us at advance@advancepower.net
Or call 1-888-228-9694 toll free or (707) 485-0588
Se habla Español
We are located at 6331 N. State St, Calpella, Ca.
Open 9-5 Monday-Friday, 10-4 Saturday and Sunday


© 2011 - Advance Power Inc.
Site Design: Do It Once Consulting
Webmaster: Valkyrie Technologies